RIPTIDE AQUACULTURE / LPS CARE

Hammer Coral Care Guide

Fimbriaphyllia ancora / Fimbriaphyllia paraancora

Hammer Corals are among the most recognizable large-polyp stony (LPS) corals in reef aquariums. Their flowing, hammer-shaped tentacles create beautiful movement, making them an excellent centerpiece for established reef tanks.

Available in a wide range of colors and patterns, including gold, green, rainbow, and splatter varieties, Hammer Corals can thrive for years when provided with stable water chemistry, moderate lighting, and gentle, indirect flow.

In this guide, Riptide Aquaculture covers everything you need to know about Hammer Coral care, including proper placement, feeding, lighting, acclimation, aggression, and the differences between branching and wall hammers.
Hammer Coral
AT A GLANCE

Hammer Coral Quick Care Guide

Important starting recommendations for keeping this species healthy.

☀️ Lighting / PAR 75–175 PAR
🌊 Water Flow Gentle to moderate, indirect
📊 Care Difficulty Beginner–Intermediate
🪸 Coral Category LPS

These are general guidelines. Individual aquariums may require adjustments. Stability is more important than chasing exact numbers.

📦
JUST RECEIVED YOUR CORAL?

Start With Proper Acclimation

Shipping can be stressful for corals. Temperature acclimate gradually and avoid sudden environmental changes, especially during colder months.

At Riptide Aquaculture, we generally recommend allowing newly shipped corals to stabilize before considering an appropriate coral dip.

Start Our Acclimation Guide →
COMPLETE CARE INSTRUCTIONS

How to Care for Hammer Coral

Select a topic below to view its detailed care instructions.

📍 Placement in Your Aquarium

Hammer Corals (Fimbriaphyllia ancora and Fimbriaphyllia paraancora) are large-polyp stony (LPS) corals that thrive in areas of the aquarium with moderate lighting, gentle to moderate indirect water flow, and enough room for their fleshy tentacles to expand.

Best Placement for Hammer Corals

For most aquariums, the lower to middle rockwork is an excellent starting location.

  • Lighting: Approximately 75–175 PAR, depending on the individual coral and its previous conditions.
  • Water flow: Gentle to moderate, indirect, and preferably variable.
  • Position: Stable rockwork where the coral cannot fall or be knocked over.
  • Spacing: Begin with at least 6 inches between the hammer and potentially incompatible neighboring corals, then adjust for full expansion and sweeper tentacle reach.

A healthy Hammer Coral should exhibit gently swaying tentacles. The flesh should not be continuously pulled sideways or pushed against its skeleton by strong directional flow.

Branching vs. Wall Hammer Placement

Branching Hammer Corals (Fimbriaphyllia paraancora) grow individual skeletal branches with separate heads. They are generally easier to position and propagate because each head develops on its own branch.

Wall Hammer Corals (Fimbriaphyllia ancora) grow along a continuous skeletal ridge. Their connected tissue can be more vulnerable when damaged, so they require especially careful handling and secure placement.

Both varieties benefit from gradual acclimation to new lighting and water movement.

Signs Your Placement Needs Adjustment

Watch for tentacles that remain tightly retracted, tissue continuously whipping in the current, a coral leaning into neighboring colonies, or tissue rubbing against sharp rockwork.

If your hammer is responding poorly, review lighting, flow, and water chemistry before relocating it repeatedly. Frequent moves can introduce additional stress.

Riptide Aquaculture Tip: Give your Hammer Coral room to grow from the beginning. A small frag can eventually develop into an impressive colony that needs substantially more space.

🧪 Water Parameters

Hammer Corals build calcium carbonate skeletons and depend on stable reef aquarium chemistry for healthy tissue expansion, skeletal growth, and long-term survival.

Recommended Hammer Coral Water Parameters

ParameterSuggested RangeTemperature76–79°FSalinity1.025–1.026 specific gravityAlkalinity7.5–9 dKHCalcium400–450 ppmMagnesium1,250–1,400 ppmNitrate2–15 ppmPhosphate0.03–0.10 ppmpHApproximately 8.0–8.4

These are practical starting targets for a mixed reef aquarium, not absolute biological limits. Successful aquariums can operate outside these ranges, particularly when conditions are consistent and changes are gradual.

Why Stability Matters

Hammer Corals can respond poorly to rapid changes in alkalinity, salinity, temperature, and lighting.

Sudden changes may cause reduced polyp extension, temporary closure, or tissue recession.

Pay particular attention to alkalinity stability. Large daily swings can be stressful even when individual test results appear acceptable.

Nitrate and Phosphate

Hammer Corals do not require completely nutrient-free water.

Extremely low nitrate and phosphate may contribute to poor coloration and reduced tissue health in some reef systems, especially when lighting is relatively strong.

Avoid making rapid nutrient corrections. If adjustments are necessary, change them gradually and monitor the coral's response.

Water Testing Recommendations

  • Monitor alkalinity consistently, particularly in aquariums with many growing stony corals.
  • Test calcium and magnesium regularly.
  • Use a calibrated refractometer or reliable salinity instrument.
  • Check nitrate and phosphate trends rather than reacting to every individual result.
  • Match replacement saltwater closely to aquarium temperature and salinity.

Riptide Aquaculture Tip: A stable aquarium running at 8 dKH is generally preferable to one repeatedly swinging between 7 and 10 dKH. Consistency is one of the most important parts of successful Hammer Coral care.

🍽️ Feeding & Nutrition

Hammer Corals obtain much of their energy from the photosynthetic symbiotic algae living within their tissues. However, they can also capture food particles and suitable small meaty foods.

Supplemental feeding is optional, but some Hammer Corals respond well to occasional feeding.

What Do Hammer Corals Eat?

Suitable food options include:

  • Finely chopped mysis shrimp
  • Small pieces of enriched marine meaty foods
  • Appropriately sized coral pellets
  • Fine particulate coral foods

The most suitable food depends on the coral's size, tentacle response, and ability to retain and consume the offering.

How Often Should You Feed Hammer Corals?

For established, healthy specimens, a reasonable starting point is approximately once or twice per week.

Hammer Corals can thrive without direct target feeding when lighting, dissolved nutrients, and the overall aquarium environment are appropriate.

How to Feed a Hammer Coral

  1. Choose a small portion of appropriate food.
  2. Temporarily reduce strong water movement if necessary.
  3. Gently deliver the food near the coral's tentacles using a feeding pipette.
  4. Allow the coral to capture the food naturally.
  5. Remove uneaten food if it begins accumulating.

Avoid forcing food into the coral's mouth or placing excessive quantities directly onto its tissues.

Should You Feed Immediately After Shipping?

We generally recommend giving newly received Hammer Corals time to settle before attempting target feeding.

A coral that has just experienced overnight shipping may be temporarily retracted or uninterested in food.

Focus first on appropriate temperature acclimation, stable water conditions, and suitable placement.

Can Overfeeding Be Harmful?

Yes. Excessive feeding can leave uneaten food in the aquarium, contribute to deteriorating water quality, and irritate stressed coral tissue.

Riptide Aquaculture Tip: Good lighting, stable water chemistry, and appropriate flow matter more than an aggressive feeding schedule. Treat supplemental feeding as a tool, not a requirement.

🌡️ Acclimation Instructions

Proper acclimation is particularly important for Hammer Corals because their large, fleshy polyps can be sensitive to abrupt environmental changes and physical damage.

At Riptide Aquaculture, we recommend prioritizing temperature stability, careful inspection, and a low-stress transfer process.

Step 1: Inspect Your Hammer Coral

Open your shipping box promptly and examine the coral while it remains in its original sealed shipping bag.

Look for obvious skeletal damage, detached tissue, or unusual tissue deterioration.

Some polyp retraction following shipping is normal. A freshly shipped Hammer Coral may look considerably smaller than it did before being packaged.

Live Arrival Guarantee: If you believe a coral arrived dead, photograph it inside the original sealed shipping bag under white lighting and email manager@riptideaquaculture.com within two hours of the delivery timestamp.

Step 2: Temperature Acclimation

Keep the bag sealed while allowing its temperature to gradually approach your aquarium temperature.

  • Warmer weather: Approximately 15–20 minutes may be an appropriate starting point.
  • Colder weather: Approximately 30–45 minutes may be needed when shipping water arrives significantly cooler.

These times are guidelines, not guarantees. Check the temperature difference whenever possible.

Avoid placing the bag against a heater or rapidly warming cold shipping water.

Step 3: Check Salinity

Compare the shipping water salinity with your aquarium using a clean sample and a reliable salinity instrument.

If there is a significant difference, use an appropriate gradual adjustment process in a separate container, balancing that process against the risks of prolonged exposure to shipping water.

Do not add shipping water directly to your display aquarium.

Step 4: Should You Dip Your Hammer Coral?

At Riptide Aquaculture, we generally do not recommend dipping corals immediately following overnight shipping unless a specific concern justifies the additional handling.

Shipping already places stress on the coral, and dipping may introduce another stressor before it has recovered.

Instead, we recommend inspecting your coral carefully and using an appropriate quarantine or observation system whenever possible.

If you decide to dip later, choose a coral-appropriate treatment, follow the manufacturer's instructions, and understand that dipping is not a substitute for quarantine.

Step 5: Initial Placement

Place the Hammer Coral where it receives gentle, indirect flow and conservative lighting.

Avoid strong direct flow that pushes its fleshy tissue against the sharp edges of its skeleton.

Gradually transition the coral toward its intended lighting conditions.

Step 6: Monitor Recovery

It is normal for a Hammer Coral to remain partially retracted after arrival.

Monitor the coral over the next several days for improving extension, tissue integrity, and normal coloration.

Persistent tissue recession, rapidly deteriorating flesh, or brown jelly-like material requires prompt investigation.

Riptide Aquaculture Tip: The goal is not to make a freshly shipped Hammer Coral open immediately. The goal is to provide a stable environment where it can recover naturally.

View Interactive Acclimation Guide →
⚠️ Compatibility & Aggression

Hammer Corals are considered aggressive LPS corals because they possess stinging cells that help them defend territory and capture food.

Their tentacles can injure nearby corals, especially when colonies expand beyond their original footprint.

How Much Space Does a Hammer Coral Need?

Start by allowing approximately 6 inches of clearance from potentially incompatible neighboring corals.

Larger colonies may require considerably more room. Observe tentacle extension during the day and after lights-out, since some colonies develop longer sweeper tentacles.

Can Hammer Corals Touch Other Hammer Corals?

Some Hammer Coral colonies tolerate contact with other hammers, particularly closely related varieties. However, compatibility is not guaranteed, even between corals sold under the same common name.

Introduce neighboring colonies cautiously and monitor their tissue for signs of irritation.

Can Hammer Corals Touch Frogspawn Corals?

Hammer and Frogspawn Corals are closely related, and some specimens may coexist in close proximity.

However, this does not mean every hammer and frogspawn combination is compatible.

Whenever possible, allow adequate spacing until you have observed how the individual colonies respond.

Can Hammer Corals Touch Torch Corals?

We recommend keeping Hammer Corals separated from Torch Corals.

Torch Corals can have powerful stings and may damage Hammer Coral tissue during prolonged contact.

Other Tank Mates

Be cautious around coral-nipping fish, animals that repeatedly disturb the coral, and mobile invertebrates that may topple unsecured frags.

Make sure the coral is firmly mounted and cannot fall onto neighboring colonies.

Chemical Competition

Soft corals, particularly some leather corals, release compounds that can influence neighboring corals.

In mixed reef aquariums, appropriate spacing, good water quality, and suitable chemical filtration may help reduce problems.

Riptide Aquaculture Tip: Plan around the size your Hammer Coral may reach in the future, not just its current frag size. Proper spacing now can prevent expensive coral losses later.

🌱 Growth & Propagation

Hammer Corals can develop into impressive colonies when provided with stable aquarium conditions, appropriate lighting, and sufficient room to expand.

Growth rates vary significantly between individual colonies and reef systems.

Branching Hammer Coral Growth

Branching Hammer Corals (Fimbriaphyllia paraancora) develop separate skeletal branches, each supporting an individual polyp head or a dividing group of heads.

Healthy colonies may gradually develop additional heads through budding and division.

Branching Hammers are generally easier to propagate because individual branches can be separated without cutting through a continuous area of living coral tissue.

Wall Hammer Coral Growth

Wall Hammer Corals (Fimbriaphyllia ancora) grow along a continuous, winding skeletal structure.

Their fleshy tissue spans the connected skeleton, making propagation more difficult and generally riskier.

Damage to the continuous living tissue can affect a larger portion of the colony.

For this reason, Wall Hammer Corals are usually better left intact unless propagation is being performed by an experienced coral aquaculturist.

How Quickly Do Hammer Corals Grow?

Growth depends on several factors:

  • Stable alkalinity, calcium, and magnesium
  • Appropriate lighting intensity
  • Gentle, indirect water flow
  • Consistent nutrient availability
  • Overall coral health and genetics

Some colonies develop new heads relatively quickly, while others grow more slowly despite receiving similar care.

Can You Frag a Hammer Coral?

Healthy branching Hammer Corals may be propagated by carefully separating appropriate skeletal branches, provided the cut is made away from living tissue.

Fragging should only be attempted with proper equipment and experience. Never cut blindly into fleshy tissue or attempt to divide a stressed colony simply to produce more frags.

Wall Hammer Corals require substantially greater caution because their continuous tissue and skeleton make separation more complicated.

Encouraging Healthy Growth

Maintain stable chemistry, avoid unnecessary relocation, and give your Hammer Coral room to expand.

Feeding may help support some colonies, but it cannot compensate for inappropriate lighting, unstable chemistry, or damaging flow.

Riptide Aquaculture Tip: We specialize in aquacultured and conditioned corals. Choosing a healthy, established Hammer Coral provides a strong starting point for growing your own colony.

AVAILABLE AT RIPTIDE AQUACULTURE

Ready to Add Hammer Coral to Your Reef?

Shop individually photographed WYSIWYG corals from our farm.

Shop Hammer Coral →
TROUBLESHOOTING

Common Hammer Coral Problems

🩺 Common Problems & Solutions

Even established Hammer Corals occasionally show signs of stress. Learning to recognize normal behavior versus genuine problems can help you respond appropriately.

Why Is My Hammer Coral Not Opening?

A closed Hammer Coral does not necessarily indicate that it is dying.

Common explanations include:

  • Recent shipping or relocation
  • Changes in lighting or water flow
  • Fish or invertebrates repeatedly disturbing the coral
  • Rapid alkalinity, salinity, or temperature changes
  • Nearby coral aggression
  • Tissue damage or disease

What to do: Start by reviewing recent changes and testing your aquarium water. Inspect the coral for tissue recession or damage. Avoid repeatedly moving it unless its present location is clearly unsuitable.

Hammer Coral Tentacles Are Short or Retracted

Tentacles may retract following shipping, during periods of irritation, or when flow is excessive.

Watch the direction and intensity of water movement. Healthy tentacles should generally sway rather than being continuously pushed sideways.

Hammer Coral Is Losing Color

Color changes can occur following changes in lighting, nutrient availability, or overall environmental conditions.

A coral becoming unusually pale may be experiencing stress or bleaching.

Check PAR levels, temperature, nutrient trends, and recent changes before making gradual corrections.

Hammer Coral Tissue Is Receding

Tissue recession exposes portions of the calcium carbonate skeleton that were previously covered by living tissue.

Potential contributors include physical damage, aggressive neighboring corals, unstable water chemistry, inappropriate flow, or disease.

Progressive recession deserves prompt attention. Inspect the coral closely and evaluate the aquarium conditions.

What Is Brown Jelly Disease?

Brown jelly syndrome is a serious condition associated with rapidly deteriorating coral tissue and brown, mucus-like material. It can affect Hammer Corals and other fleshy stony corals.

If you suspect brown jelly syndrome:

  1. Avoid disturbing the material or dispersing it through the display aquarium.
  2. Consider carefully isolating the affected coral in a separate treatment or observation container.
  3. Assess nearby susceptible corals for signs of deterioration.
  4. Seek experienced coral-health guidance promptly before applying treatments.

There is no single universally proven home treatment appropriate for every case. Rapid tissue loss should not be treated as ordinary shipping-related retraction.

Brown Tissue or Skeleton Showing at the Base

A Hammer Coral's skeleton is normally visible beneath its fleshy polyps, especially when retracted.

However, an expanding area of newly exposed skeleton where living tissue previously existed may indicate recession.

Photographing the coral under consistent lighting can help identify whether the affected area is expanding.

Why Is One Head Closed While the Others Are Open?

Individual heads can respond differently to flow, lighting, injury, or localized irritation.

On branching specimens, one head may be stressed while adjacent heads remain fully expanded.

Inspect the affected head carefully rather than assuming the entire colony has the same problem.

Is It Normal for Hammer Corals to Close at Night?

Yes. Many Hammer Corals retract or reduce their extension when the aquarium lights are off.

Normal daytime extension accompanied by nighttime retraction is not inherently a sign of disease.

When Should You Contact Riptide Aquaculture?

If your newly received Hammer Coral is showing unusual tissue loss, significant damage, or other concerning symptoms, contact us with clear photographs and your order information.

For Live Arrival Guarantee claims, follow our required two-hour reporting window and sealed-bag photograph policy.

Remember: A Hammer Coral that is simply closed may need time. A coral experiencing rapid tissue deterioration requires more urgent attention.

REEFKEEPING QUESTIONS

Hammer Coral FAQs

❓ Frequently Asked Questions

Are Hammer Corals Good for Beginners?

Hammer Corals can be suitable for reefkeepers with some experience maintaining stable saltwater aquarium conditions. Healthy branching varieties are often more forgiving than wall varieties, but both require consistent water chemistry and appropriate placement.

How Much Light Does a Hammer Coral Need?

Approximately 75–175 PAR is a reasonable starting range for many Hammer Corals. Individual specimens may prefer different intensities depending on their previous lighting conditions and acclimation history.

Do Hammer Corals Need High Water Flow?

No. Hammer Corals generally prefer gentle to moderate, indirect flow that allows their tentacles to sway naturally without being forced against the skeleton.

Where Should I Place a Hammer Coral?

Lower to middle rockwork is often a good starting location. Choose a stable area with moderate lighting, indirect water movement, and enough room for full polyp extension.

What Is the Difference Between a Branching Hammer and a Wall Hammer?

Branching Hammer Corals (Fimbriaphyllia paraancora) grow individual skeletal branches with separate heads. Wall Hammer Corals (Fimbriaphyllia ancora) grow along a continuous skeletal ridge. Branching varieties are generally easier to propagate.

How Often Should I Feed a Hammer Coral?

Direct feeding is optional. Some established Hammer Corals benefit from small portions of suitable food once or twice per week, while others thrive without regular target feeding.

What Do Hammer Corals Eat?

Hammer Corals receive much of their energy through photosynthesis. They may also capture small meaty foods, appropriately sized coral pellets, and other suitable food particles.

Why Is My Hammer Coral Closed After Shipping?

Temporary retraction is common after shipping because the coral has experienced handling, reduced light, and changing environmental conditions. Watch for gradual improvement while monitoring tissue health and aquarium stability.

Should I Dip My Hammer Coral Immediately After Arrival?

At Riptide Aquaculture, we generally recommend allowing newly shipped corals to stabilize before considering a dip. Inspect carefully and use quarantine when possible. Treatment decisions should account for the coral's condition and specific risks.

How Long Should I Temperature Acclimate a Hammer Coral?

Approximately 15–20 minutes may be a reasonable starting point in warmer conditions, while 30–45 minutes may be appropriate when shipping water arrives significantly cooler. Actual temperature differences matter more than the timer.

Can Hammer Corals Touch Each Other?

Some Hammer Coral colonies tolerate contact, but compatibility is not guaranteed. Monitor interactions carefully and provide additional space whenever signs of irritation appear.

Can Hammer Corals Touch Torch Corals?

We recommend separating Hammer Corals from Torch Corals. Torch Coral stings can injure Hammer Coral tissue, particularly during prolonged contact.

Can Hammer Corals Touch Frogspawn Corals?

Some Hammer and Frogspawn Corals coexist closely, but compatibility varies between individual colonies. Provide spacing and monitor for signs of aggression.

How Far Apart Should Hammer Corals Be From Other Corals?

Approximately 6 inches is a useful initial spacing guideline for potentially incompatible neighbors. Larger colonies and long sweeper tentacles may require considerably more room.

Why Is My Hammer Coral Losing Color?

Color changes may be related to lighting, nutrition, temperature stress, or changes in aquarium chemistry. Review recent changes and check relevant parameters before adjusting conditions gradually.

What Causes Hammer Coral Tissue Recession?

Potential contributors include physical injury, coral aggression, unstable water parameters, inappropriate flow, and disease. Progressive tissue recession warrants prompt investigation.

What Is Brown Jelly Disease in Hammer Corals?

Brown jelly syndrome is associated with rapid tissue deterioration and brown, mucus-like material. Suspected cases should be handled carefully to avoid dispersing affected material, and experienced coral-health guidance should be sought promptly.

How Quickly Do Hammer Corals Grow?

Growth varies by coral and aquarium. Under suitable conditions, branching specimens may develop additional heads over time. Stable water chemistry, adequate light, appropriate nutrition, and sufficient space help support healthy growth.

Can You Frag a Hammer Coral?

Branching Hammer Corals can sometimes be propagated by separating healthy skeletal branches without damaging living tissue. Wall Hammer Corals are more difficult to propagate because their tissue extends across a continuous skeleton.

Are Hammer Corals Reef Safe?

Hammer Corals are suitable for many reef aquariums, but they are aggressive toward some neighboring corals. Proper spacing is important to prevent stinging damage.

What Is the Best Alkalinity for Hammer Corals?

A stable alkalinity around 7.5–9 dKH is a practical target for many reef aquariums. Consistency is generally more important than maintaining one exact number.

Where Can I Buy WYSIWYG Hammer Corals?

Riptide Aquaculture offers individually photographed WYSIWYG Hammer Corals when available, including colorful branching, gold, rainbow, and splatter varieties. Browse our current collection to see the exact corals available for your reef.

SHOP OUR FARM

Shop Hammer Coral at Riptide Aquaculture

Explore available WYSIWYG corals from our current inventory.

Build a Healthier, More Colorful Reef

Browse the latest WYSIWYG corals available from Riptide Aquaculture. Each piece is individually photographed so you can choose the coral you want.

Shop Riptide Aquaculture →